GPS interference, jamming, and spoofing: how to make your time source resilient
Virtually all time servers obtain their time from satellite navigation (GNSS), such as GPS and Galileo. This is accurate and reliable, but the signal is weak and therefore vulnerable. For organizations where time is business-critical, it pays to consider what happens if that signal drops out or is incorrect.
Three types of problems
Dropout: a defective antenna, a damaged cable, lightning strike, or a new roof structure that blocks the view of the sky.
Jamming: a jamming device overrides the satellite signal. This can happen intentionally, but also unintentionally, for example due to a 'GPS blocker' in a passing car.
Spoofing: a false signal that pretends to be a real satellite. As a result, a receiver can pick up an incorrect time or position without anyone noticing.
Why this is becoming increasingly important
Satellite signal interference occurs more frequently in Europe than in the past, particularly around conflict zones. At the same time, an increasing number of systems depend on precise time: from security logging and payment transactions to telecommunications and energy grids. Therefore, a central focus in international standards, such as the IEEE 1952 framework for resilient time and positioning systems, is that equipment must be able to recognize deviations, handle them, and then recover correctly.
Five measures
Position the antenna properly. With a clear view of the sky, away from transmitters, and with surge protection in the cable.
Use multiple satellite systems. A receiver that uses both GPS and Galileo is less dependent on a single system and can detect discrepancies between them.
Choose sufficient holdover. A stable oscillator accurately holds the time until the signal reliably returns (see our article on holdover).
Ensure a second time source is in place. For example, a second time server at a different location, or a time reference via the network (PTP or NTP) as a check alongside your own receiver.
Monitor and check. Have the time server send a notification in case of signal loss or a sudden time jump. A time server that compares multiple sources can automatically ignore a suspicious source.
Need advice?
BerdoTime advises on resilient time synchronization: from antenna installations to redundant time servers with multiple time sources. Call 085-4000265 or email info@berdo.nl .



Comments