Replacing the master clock: what should you look out for?
Many schools, hospitals, factories, and offices have a time clock system that has been in use for decades. A master clock (also called a master clock) in the technical room controls all secondary clocks in the building via a clock line. If that master clock fails or parts for it are no longer available, you do not need to replace the entire system. Often, the wiring and the clocks can remain in place.
Signs that replacement is needed
Clocks run slow or fast and must be adjusted manually regularly.
The switch to summer or winter time is no longer automatic.
The master clock has no time receiver, or the DCF receiver is no longer working.
There are no more spare parts, or the supplier no longer exists.
You want the clocks to align with the time of the IT network.
Step 1: Map out your installation
Before a new master clock can be chosen, it must be clear what is currently installed. Note:
how many secondary clocks there are, and to how many lines they are connected;
what kind of signal the clocks receive: minute pulses, half-minute pulses, second pulses, or a time code;
the line voltage (often 24 volts) and, if known, the current consumption per line;
whether other functions are connected to the master clock, such as school bells, lighting, or access control;
which clocks are already defective.
A photo of the master clock, the nameplate, and a few secondary clocks would already help us a great deal.
Step 2: choose the new master clock
Modern master clocks simply drive existing pulse clocks, but additionally offer a built-in time server and a time receiver. At BerdoTime, the most popular options are:
Mobatime DTS 4801, 4802, or 4806: network master clocks with 1, 2, or 6 clock lines and a built-in NTP server. They simultaneously control pulse clocks, self-setting MOBALine clocks, DCF clocks, and NTP clocks.
Mobatime ETC 12, 14 or 24: master clocks with switching programs, for example for school bells and lighting.
Müller SC pro: compact DIN rail-mounted master clocks for smaller installations.
View the complete overview on our mother clocks page.
Step 3: modernize at your own pace
With a network master clock, you do not have to do everything at once. The existing pulse clocks continue to function. During renovations or expansions, you choose clocks via NTP and PoE that run at the same time. Defective old clocks can often be fitted with a new movement , so that the case and dial remain in place.
What happens during a power outage?
Pulse clocks run in sync with the master clock. If the power fails, the master clock retains the time and automatically catches up with the secondary clocks after the power is restored. Self-setting clocks via MOBALine or NTP set themselves correctly immediately.
Advice or quotation
Send us a photo of your master clock and an indication of the number of clocks. BerdoTime advises on the correct replacement and integration with your existing clocks throughout the Netherlands and Belgium. Call 085-4000265 or email info@berdo.nl .



Comments