top of page

Holdover: how long does your time server remain accurate without GPS?

6 hours ago
2 min read

A time server usually retrieves its time from satellite signals. But what happens if that signal drops out due to a defective antenna, a cable break, or a malfunction? Then the time server switches to holdover : it holds the time itself using its internal oscillator. How long this works depends on the type of oscillator.

Why does a clock run away?

Every clock has a 'pendulum': an oscillator that vibrates at a fixed frequency. No oscillator is perfect. Temperature, aging, and minor deviations cause the clock to slowly run fast or slow. As long as there is a satellite signal, that deviation is continuously corrected. Without a signal, the error accumulates.

The three common oscillators

  • TCXO (temperature-compensated crystal): compact and affordable. Suitable for NTP applications where a deviation of milliseconds is acceptable and interruptions are brief.

  • OCXO (crystal in a heated 'mini oven'): much more stable because the temperature is kept constant. A good OCXO typically remains within a few microseconds after a day without GPS. The standard choice for professional time servers and PTP.

  • Rubidium (atomic oscillator): the best choice if time must remain highly accurate even during a prolonged malfunction. After a day, the deviation typically remains within a few hundred nanoseconds. Used in telecommunications, financial trading, and defense.

How do you choose?

Ask yourself two questions:

  1. What is the minimum accuracy required for the time? For logging and wall clocks, a millisecond is more than sufficient. For PTP in telecom or trade, it concerns microseconds or less.

  2. How long should that work without GPS? A few hours until the mechanic arrives, or a whole weekend?

Combine those two and you will know which oscillator fits. A more expensive oscillator only makes sense if the requirements call for it.

More than just a better oscillator

Holdover is your safety net, but prevention is better. Position the antenna properly, monitor the time server with alerts, and consider a second time server or a second time source. Also read our article on making your time source resilient against GPS interference.

Need advice?

BerdoTime's Mobatime time servers are available with various oscillators. We help you choose based on your requirements. Call 085-4000265 or email info@berdo.nl .

 
 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
Network clocks
DTS new photo.jpeg
data network ntp server
bottom of page